I take great care and attention to detail with every painting project. Preparation is key. Holes and cracks are filled with a high quality calk or putty and sanded where need be and textured to match depending on the surface. For exteriors I start with power washing, loose paint is removed further by scraping and/or sanding and primer is applied to these areas.

 

I use high quality paint for all my work and I make sure you are satisfied with the finished product before I’m done.

​

Homes

Inside and out, varying surfaces, I paint wood, metal, vinyl, stucco etc. If you have peeling paint I can take care of that first and make sure you have a stable foundation before applying a first finishing coat. 

​

Cabinets

Attention to detail is key here. I have a step by step process that is efficient and allows you to use your kitchen while I do the work.

​

Decks

I clean and sand all surfaces and apply 2 coats of stain unless otherwise required.

​

Trim Work

I use special paint for all my trim projects, fill nail holes, and calk gaps where needed before applying the first coat.

​

Ceilings

I do my best to prep the surface and fill any cracks and prime where needed and then apply two coats of quality ceiling paint.​

​

Walls

I take pride in my ability to be efficient with your project while never compromising a quality finish. Preparation is always the most important step.​​